Description
Blauberg AirOne E – Single-Room Heat Recovery Ventilation with Electric Preheater
The Blauberg AirOne E provides continuous supply and extract ventilation for individual rooms in homes, apartments and offices. Installed through an external wall, it introduces fresh, filtered air while removing stale air and recovering heat that would otherwise be lost.
With no central distribution ductwork required, AirOne E is a practical solution for refurbishment projects and rooms where installing a centralised ventilation system is difficult.
Continuous Supply and Extract
Two energy-efficient EC centrifugal fans supply and extract air simultaneously through separate air paths. Unlike alternating push-pull units, AirOne E does not reverse its airflow direction during normal heat recovery operation. A single unit provides both supply and extract ventilation for the room.
Counter-Flow Heat Recovery
The counter-flow heat exchanger transfers heat from the outgoing extract air to the incoming fresh air, helping reduce ventilation heat losses during colder weather.
Integrated Electric Preheater
AirOne E includes a 200 W electric preheater to protect the heat exchanger against freezing in cold weather. This preheater provides frost protection; it is not designed to heat the room.
Adjustable Airflow
Three standard speeds and a boost setting allow ventilation to be matched to the room’s requirements:
- Speed 1: 30 m³/h — approximately 8.3 l/s.
- Speed 2: 50 m³/h — approximately 13.9 l/s.
- Speed 3: 75 m³/h — approximately 20.8 l/s.
- Boost: Up to 120 m³/h — approximately 33.3 l/s.
Quiet, Energy-Efficient Operation
EC motors and the positioning of the fan section towards the outdoor side help minimise indoor noise. Published sound pressure levels at 3 metres are 12, 21 and 27 dB(A) at the three standard speeds respectively.
Wi-Fi and App Control
Operate AirOne E using its integrated control panel or the Blauberg Home app for Android and iOS. Control features include:
- Fan speed adjustment.
- Weekly scheduling.
- Night timer.
- Filter maintenance reminders.
- Alarm indication.
The built-in humidity sensor can activate boost ventilation when required. Compatible external controls, including an optional CO₂ sensor, can also be connected.
Filtered Fresh Air
Supply and extract filters help protect the unit and filter incoming air. An optional ISO ePM1 70% / F8 fine supply filter is available for enhanced filtration.
Through-Wall Installation
AirOne E fits through a single external wall opening, with a decorative indoor panel and an external weather hood.
The nominal air duct diameter is 250 mm, increasing to 320 mm externally with the optional EPP insulated sleeve. Different hood, spacer and extension arrangements accommodate wall thicknesses from 300 to 800 mm, depending on the installation configuration.
Straightforward Maintenance
Accessible filters and internal components simplify routine cleaning and servicing, while the filter maintenance indicator reminds users when attention is required.

